Video - Brickcom FD-100A Series User Manual

.

Video

You can set up two separate streams for the Network Camera for different viewing
devices.
Stream 1 & Stream 2
Video Codec - The Network Camera offers three choices of video codec standards
for real-time viewing: H.264, MPEG-4 and MJPEG.
Video Resolution - Select from the drop down list to choose the best resolution that
fit your need.
Frame Rate - Select from the drop down list of the frame rate, which ranges from 2 to
30 fps when H.264 or MJPEG is selected. Only 3 to 15 fps can be chosen when
MPEG-4 is selected. Set the frame rate higher for a smoother video quality.
Video quality and bit rate - User can either choose "quality" or "bitrate" to
control the video quality with video codec at H.264 or MPEG4. Only "quality" can
be chosen when video codec at MJPEG is selected. Set the bitrate higher for a
better video quality. However, high bitrate may cost high network bandwidth
resources.
The video qualities are selectable at the following settings: SoSo, OK, Not Bad,
Medium, Standard, and Good.
29