Xerox Phaser 5335 User Manual page 25

Note
• If you went past the desired item, return to the item by
pressing the < > button.
3. Press the < > button to accept the selection.
[Network/Port] is displayed.
Note
• If you pressed the < > button on the wrong item,
return to the previous screen by pressing the <
button.
• To start over from the beginning, press the
<Menu> button.
4. Press the < > button to accept the selection.
[Parallel] is displayed.
5. Press the < > button until [TCP/IP] is displayed.
6. Press the < > button to accept the selection.
[Get IP Address] is displayed.
7. Press the < > button to accept the selection.
The current setting is displayed.
8. Press the < > button until [Panel] is displayed.
Admin Menu
Network / Port
>
Network / Port
Parallel
Network / Port
TCP/IP
TCP/IP
Get IP Address
Get IP Address
DHCP/Autonet*
Get IP Address
1.3 Setting the Network Environment
Panel
7