Changing The Settings - Xerox Phaser 5335 User Manual

Changing the Settings

Basic Procedure
To display a menu screen or to move up and down the menus, use the following buttons on
the control panel.
Press to display the menu screen
(print screen)
Ready to print
<Menu>
Note
• Once you save a value by pressing the
value. To change the value, return to the initial screen and repeat the preceding steps.
• If the menu screen is left idle for 3 minutes, the display returns to the print screen. Any incomplete
setting on the menu screen made 3 minutes before becomes invalid.
Resetting a Value to Its Default
To reset a value to its default, display the value and press the < > and < > buttons
simultaneously. The value changes to its factory setting. To accept the value, press the
(menu screen)
<Menu>
Menu
Print Language
<
< >
Menu
Admin Menu
<
<
Press to close the menu screen
<OK/Eject> button.
Press to display the menu items in the same hierarchy
>
< >
Admin Menu
Network / Port
< >
>: Press to display a lower hierarchy
>: Press to display a higher hierarchy
<OK/Eject> button, an asterisk "*" appears next to the
(option selection screen)
Port Status
Port Status
(" * " appears next to the
option selected)
5.1 Overview of the Common Menus
Enable
<OK/Eject>
Press to accept
the selection
Enable *
75