Installing Additional Memory - Xerox Phaser 5335 User Manual

A.5

Installing Additional Memory

In case of the following situations, install additional memory to the printer.
• When [Print Page Mode] is set to [On] on your print driver
Setting [Print Page Mode] to [On] changes the printing method of the printer. When
printing large data, or when the printer is taking too much time to print, set [Print Page
Mode] to [On] and try printing again.
• When the [Out of memory] message appears frequently on the control panel
Additional memory may also be required depending on the [Print Mode] setting on the print
driver and the paper size to be printed.
The following table lists the required memory capacity.
Print
Mode
Standard
PCL
print driver
High
Quality
Output possible
Recommended capacity: Memory capacity recommended by Xerox.
Values of the required memory capacity also vary depending on the usage environment of
the printer.
Note
• When using long paper, 2-sided printing and the printing in the [High Quality] print mode are not
available.
• For more information about additional memory and how to order it, refer to "A.2 Optional Accessories"
(P. 186).
Paper Size
Output
Possible
A5
B4
A4 Standard
(64 MB)
8.5 x 14"
Long paper
(297 x 900 mm)
A5
Standard
B5
(64 MB)
A4
8.5 x 14"
: Most data can be printed. However, some data may not be
printed depending on the type of print data, or the print speed
may decrease when 2-sided printing is performed.
1 Sided Print
Recommended
Capacity
Standard
(64 MB)
Standard
(64 MB)
A.5 Installing Additional Memory
2 Sided Print
Output Recommended
Possible Capacity
Standard Standard
(64 MB) (64 MB)
- -
Standard Standard
(64 MB) (64 MB)
320 MB 320 MB
(Standard + (Standard +
256 MB) 256 MB)
189