Xerox Phaser 5335 User Manual page 97

Setting Item
Sets the amount of time the printer waits for a print job. If a time-out occurs dur-
PS Job Time-out
ing data reception, the printer stops the reception and prints the data that has
been received.
Specify the time-out value in 1 minute increments.
• [Off] (default)
• [1 Minutes] to [900 Minutes]
Note
• After changing this setting, reboot the printer.
Initializes the PostScript information stored in the hard disk.
Init PS Disk
Note
• [Init PS Disk] appears only when the hard disk (optional) is installed.
Sets whether to enable the PostScript DMS (Deferred Media Selection) fea-
Paper Select Mode
ture.
• [Auto] (default)
• [Select From Tray]
Note
• After changing this setting, reboot the printer.
Disables the job time-out.
Enables the DMS feature.
Disables the DMS feature and selects a paper tray.
Description
5.2 Setting the Common Menus
79