Strong SRT 7000 User Manual page 21

PART 1 • English
Photo
Your receiver allows you to watch a slide show with all photo's available in the chosen folder. To use the
slide show choose a folder with photo files. Press PlAY (u) to start and SToP (3) or EXIT to stop the
slide show. See the different Photo Configure options explained in point 7.7.2 below.
In the Photo mode there are following functions available:
ok: opens selected photo in full screen format.
PlAY (u): starts slide show; 2: to pause/resume slide show.
3 or EXIT: to close full screen format or to stop slide show and return to the folder view.
Info: to open/close the photo details banner while in full screen or slide show mode.
RED: to zoom the displayed photo (use pqtu to navigate to the desired part of the zoomed picture).
gREEn: to turn the photo counterclockwise.
YElloW: to turn the photo clockwise.
goTo: opens a Grid view (to go back press EXIT)
RECAll: goes to the up folder.
7 and 8: opens the previous/next photo.
REPEAT: functionality is explained in Music section above. When you enter the Photo menu while
listening to the music, then the music playback will be automatically switched to repeat all mode. You
can now enjoy your pictures while listening to the music and use in slide show mode all the REPEAT
functions for photos playback.
EXIT: to get back to the Multimedia menu. Press EXIT once more if want to leave the Multimedia menu.
Playback of Movie and Records
In the Movie menu you have to navigate to a movie file. In the Records menu you have to select the folder
"MYRECORD" where recordings are stored. You can directly access recordings out of TV mode just by
pressing the lIST button.
Select the file and press ok to start the playback in preview mode. Use the RED button to switch
between preview and full screen. Use RECAll to go to the up folder.
During playback you can use the playback control buttons, such as PAUSE (2), PlAY (u), SToP (3),
REv (tt), fWD (uu), PREv (7) and nEXT (8). You can check the file details by pressing the Info
button in full screen mode. For closing banner use Info again or press EXIT. Use the goTo button
to enter with the 0~9 buttons the desired time moment you want to jump to and press ok to confirm.
With the tt and uubuttons you can review or forward the playback with x2, x4, x8, x16 and x32 speed.
If reviewing reaches the beginning, it will resume the playback of the current file, and if forwarding
reaches the end, the playback of the next file will start. With the 7 and 8 buttons you can jump to the
previous/next video file. In the Movie mode (not in Records) is also possible to use the REPEAT button
(its functionality is explained in Music section above).
Additionally in the Records Menu you can Delete or Rename files.
To Delete a recording(s) – select the desired file(s) by pressing the YElloW button (pressing again
removes the delete mark) and confirm with ok. In the appeared message confirm the deletion with ok
or press EXIT to cancel. It is possible to delete files in other folders or even whole folders as well.
To Rename a recording – you only can rename files, which were recorded with the receiver. Select the
desired file and press gREEn button. In the appeared key table select a character by using the navigation
buttons. Press ok to choose the character. Once you finish inputting the new name, navigate to "OK"
button on screen and press ok on the remote control to store the new name. The file extension (.rec)
should not be reentered, as it will be added automatically.
* STRONG cannot guarantee the playback of video files although extensions are listed here, as the
correct playback depends on codec used, data bit rate and resolution as well. Please consult the
STRONG Hotline in your country to get more details.
18