Connecting To Snmp-1000 Remote Manager; Atx Power Control Connectors (Cn20); Controlling The Soft Power Switch; 4-Pit Auxiliary Power Connector (Cn46 & Atx1) - Advantech PCA-6005-B User Manual

This connector is reserved for Advantech's SNMP-1000 HTTP/SNMP
Remote System Manager. The SNMP-1000 allows users to monitor the
internal voltages, temperature and fans from a remote computer through
an Ethernet network.

2.11.6 Connecting to SNMP-1000 remote manager

Use the 6-pin to 8-pin cable to connect the CPU card to SNMP-1000.
This cable comes with the SNMP-1000.
PIN 1

2.12 ATX Power Control Connectors (CN20)

Connect to CN1 on the Advantech backplane to enable the ATX function,
5V stand-by.
2.13 4-pit Auxiliary power connector (CN46 & ATX1)
To supply adequate 12V power to the CPU card, the PCA-6005-B pro-
vides two auxiliary power connectors, CN46 and ATX1. CN46 accepts a
standard device power connector, and ATX1 accepts 4-pin ATX 12V
connector.
Warning:
CN21 CN18
CN19 CN29
CPU Card
Either CN31 or ATX1 has to be connected, oth-
erwise the system may be unstable.
PIN 1
25
CN19
SNMP-1000
CN20