Printer Driver Settings - Konica Minolta bizhub 362 User Manual

4
5
To apply the settings, restart this machine (turn the main power off,
then on again).
Reminder
When turning the machine off, then on again with the main power switch,
wait about 10 seconds to turn the machine on after turning it off. The
machine may not operate correctly if it is turned on immediately after
being turned off.

Printer driver settings

1
For Windows 2000/NT 4.0, click the [Start] button, point to "Settings",
and then click "Printers".
For Windows XP/Server 2003, click the [Start] button, and then click
"Printers and Faxes".
For Windows Vista/Server 2008, click the [Start] button, and then click
"Control panel", "Hardware and Sound", and "Printers".
– If "Printers and Faxes" does not appear in the Start menu in
Windows XP/Server 2003, open the Control Panel from the Start
menu, select "Printers and Other Hardware", and then select
"Printers and Faxes".
For Windows Vista/Server 2008, if the control panel is in the classic
view, double-click "Printers".
2
Right-click the icon of the installed printer, and then click "Properties".
3
Click the [Add Port] button on the Ports tab, double-click "Local Port"
or select "Local Port" and click the [New Port] button, and then enter
"\\<NetBIOS_name>\<printing_service_name>".
– Enter the same NetBIOS name and printing service name that you
entered in PageScope Web Connection. For the setting procedure,
refer to "Operations on this machine" on page 4-10.
4
Click the [Close] button to apply the setting.
4-12
Setting up network printing
bizhub 362/282/222