8
Specifying the center staple and fold setting
You can specify to center staple and fold a printed document. By specifying
the center staple and fold setting, printed documents can be folded in half
and stapled.
Reminder
The center staple and fold function is available only when optional finisher
and saddle kit are installed.
1
Click the Finish tab.
2
Select the "Center Staple and Fold" check box.
Hole punching
Holes can be punched into the printed document.
Reminder
The hole punch function is available only when the punch kit is installed
on the optional finisher.
1
Click the Finish tab.
2
Select the "Punch" check box.
3
From the drop-down list, specify the number of punched holes.
Note
The hole-punch position changes according to the binding position
specified from "Binding Direction".
Specifying the output tray
You can specify the tray to which the printed document is output.
1
Click the Finish tab.
2
From the "Output Tray" drop-down list, specify the output tray.
8-22
Setting up the VXL/VPS driver (Windows Vista/Server 2008)
bizhub 362/282/222