Konica Minolta bizhub 362 User Manual page 319

Various settings
4
Touch either [Bit Selection] or [HEX Selection], and then specify the
setting.
– To specify Bit selection, touch
[Bit Selection], touch
move the cursor to the bit to be
changed, type in the value using
keypad, and then touch [Set] on
the lower right of the screen.
– To specify Hex Selection, touch
[HEX Selection], specify the value
by using keypad and by touching
[A] to [F], and then touch [Set] on
the lower right of the screen.
5
To change the setting for a different mode, repeat steps 3 and 4.
6
Touch [Enter] on the upper right of the screen until the first screen
appears.
bizhub 362/282/222
or to
11
11-25