Network Printing From A Windows Operating System - Konica Minolta bizhub 362 User Manual

4

Network printing from a Windows operating system

Windows
printing
LPR printing
IPP printing
Port 9100
printing
For details, refer to "Windows printing" on page 4-10.
Note
Before setting up network printing, install the printer driver. For details,
refer to "Installing the printer driver" on page 3-3.
To perform network printing, change the printer port for the installed
printer driver to one for a network connection, and then change the
settings on this machine as necessary. For an IPP connection, it is
necessary to install the printer driver first.
Only the PCL printer driver can be used with Windows printing. If network
printing with the PostScript printer driver, use LPR printing or Port 9100
printing.
Network printing in a NetWare environment
NetWare version
NetWare 4.x
NetWare 5.x/6
4-6
Protocol Windows
used 2000
TCP/IP, +
NetBEUI
TCP/IP o
TCP/IP o
TCP/IP o
Protocol used
IPX
IPX
TCP/IP
Setting up network printing
Windows Windows
XP/Vista NT 4.0
+ +
o o
o
o
Emulation
NDS/Bindery
NDS
NDPS(lpr)
bizhub 362/282/222
Windows
Server
2003/Server
2008
+
o
o
o
Service mode
Pserver/Nprinter
Pserver