For Netware 4.X/5.X/6 Print Server Mode (Nds) - Konica Minolta bizhub 362 User Manual

Print operations
Hide thumbs Also See for bizhub 362:
Table of Contents

Advertisement

Setting up network printing
Printer Number: Specify "255". (Set the number assigned to the
printer (0 to 254) or 255.)
6
Restart this machine (turn the main power off, then on again).
7
Use the NetWare server console to load PSERVER.NLM.
8
Use the NetWare server console to display the print server screen, and
then check that "XXX" (created printer) is shown as "Waiting for Job"
for the connected printer (0).
Reminder
When turning the machine off, then on again with the main power switch,
wait about 10 seconds to turn the machine on after turning it off. The
machine may not operate correctly if it is turned on immediately after
being turned off.

For NetWare 4.x/5.x/6 Print Server mode (NDS)

To use the Print Server mode, IPX protocol must be loaded on the NetWare
server.
1
Log on to NetWare as an administrator from a client computer.
2
Start up NWadmin.
3
Select either the organization or organizational unit container that
offers the print service, and then click "Print Services Quick Setup
(non-NDPS)" on the "Tools" menu.
4
Enter the appropriate names in the "Printer Server Name", "Printer
Name", "Print Queue Name", and "Print Queue Volume" fields, select
"Other/Unknown" from the "Printer Type" field, and then click the
[Create] button.
For queue user privileges, printer notification option, assignment of
multiple queues, and passwords, refer to the NetWare
documentation, and specify settings as necessary.
bizhub 362/282/222
4
4-29

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Bizhub 282Bizhub 222

Table of Contents