For Mac Os X - Konica Minolta bizhub 362 User Manual

4
6
If using an AppleTalk connection, click the AppleTalk tab, and then
check that the "Make AppleTalk Active" check box is selected.
7
Click the close button at the top left of the dialog box.
– For Mac OS X 10.2/10.3/10.4, the "Apply configuration changes?"
message appears.
– For Mac OS X 10.5, the "This service has unsaved changes"
message appears.
8
Click the [Apply] button.
The AppleTalk and Ethernet settings are saved.
For Mac OS 9.2
1
On the Apple menu, point to "Control Panels", and then click
"AppleTalk".
2
From the "Connect via" drop-down list, select "Ethernet".
3
On the Apple menu, point to "Control Panels", and then click "TCP/IP".
4
From the "Connect via" drop-down list, select "Ethernet".
5
Select the items from "Configure" that correspond to the network
settings for the Macintosh computer that is connected to the network,
and then set the IP address and subnet mask.
6
Click the close button at the top left of the dialog box.
The "Save changes to the current configuration?" message appears.
7
Click the [Save] button.
4-36
Setting up network printing
bizhub 362/282/222