Setting up network printing
Network connection methods that can be selected in each Windows op-
erating system
This chapter describes the settings that must be specified for network print-
ing.
Setting procedures differ depending on the method of networking printing
used (SMB, LPR, or IPP printing). Select the best method of network printing
for your Windows environment.
Network printing from a Windows operating system
SMB printing
LPR printing
IPP printing
Port 9100
printing
Reminder
Before setting up network printing, install the printer driver. For details on
installing the printer driver, refer to "Installing the printer driver" on
page 2-1.
To perform network printing, change the printer port for the installed
printer driver to one for a network connection, and then change the set-
tings on this machine as necessary.
For an IPP connection, it is necessary to install the printer driver first.
Network printing in a NetWare environment
NetWare version
NetWare 4.x
NetWare 5.x/6
C451
Protocol
Windows
used
2000
TCP/IP, Net-
o
BEUI
TCP/IP
o
TCP/IP
o
TCP/IP
o
Protocol used
IPX
IPX
TCP/IP
Windows XP
Windows NT
4.0
o
o
o
o
o
Emulation
NDS/Bindery
NDS
NDPS (lpr)
3
Windows
Server 2003
o
o
o
o
Service mode
PServer/Nprinter
PServer
3-3