Fault Reset; Firmware Upgrade - Sena SPH10H-FM User Manual

Bluetooth stereo headset & intercom with built-in fm tuner for half helmets

Hide thumbs Also See for SPH10H-FM:

Table of Contents

SPH10H-FM

23. FAULT RESET

When the SPH10H-FM is not working properly or is in

faulty status for any reason, you may reset by pushing

the pin-hole reset button at the back of the headset main

unit. Insert a paper clip into the reset pin-hole and press

the reset button for a second with light pressure. The

SPH10H-FM will be switched off after which time, you

have to turn the system back on and try again. However,

this will not restore the headset to factory default settings.

The SPH10H-FM supports firmware upgrade function.

Please visit Sena Bluetooth web site at www.sena.

com to check the latest software downloads.

Table of Contents

Show Quick Links

Table of Contents