Region Selection; Reset To Factory Default Settings - Sena SPH10H-FM User Manual

21.6 Region Selection

You can select proper FM frequency region from
Sena device manager. With the region setting, you
may optimize seek function to avoid unnecessary
frequency range (Factory default: worldwide).
Region Frequency Range
Worldwide 76.0 ~ 108.0 MHz
Americas 87.5 ~ 107.9 MHz
Asia 87.5 ~ 108.0 MHz
Australia 87.5 ~ 107.9 MHz
Europe 87.5 ~ 108.0 MHz
Japan 76.0 ~ 90.0 MHz
22. RESET TO FACTORY DEFAULT
1. To restore the SPH10H-FM to factory default
Step
settings, press and hold the Phone Button for 12
seconds until the LED shows solid red and you
± 100 kHz
hear double beeps. You will hear a voice prompt
± 200 kHz
saying "Factory reset".
± 100 kHz
2. Within 5 seconds, press the Jog Dial to confirm
± 200 kHz
reset. The headset will be restored to factory
± 100 kHz setting and switched off automatically. You will
hear a voice prompt saying "Headset reset,
± 100 kHz
good-bye".
3. If you don't press the Jog Dial within 5 seconds,
the reset attempt is canceled and the headset
returns to stand-by mode. You will hear a voice
prompt saying, "Canceled".
SPH10H-FM
SETTINGS
41