Scan And Save; Temporary Preset - Sena SPH10H-FM User Manual

SPH10H-FM
Note:
You can save FM stations to presets before using FM
radio. Connect SPH10H-FM to your PC and open the
Sena Device Manager. It allows you to save FM station
frequencies up to 10 presets on the SPH10H-FM setting
menu.

21.4 Scan and Save

"Scan" is the function that searches from the current
station frequency upward for stations in a whole
range of FM frequencies. To use the scan function,
please follow the procedures below:
1. Double tap the Phone Button. Then the current
station frequency moves upward to find other
station frequencies.
2. If the tuner finds a station, it stays at the station
frequency for 8 seconds, then scanning to the next
station frequency.
3. Scan function stops when you double tap the
Phone Button again.
4. To save a station while scanning frequencies, tap
the Phone Button when at that station. You will hear
a voice prompt from the SPH10H-FM saying "Save
preset (#)". The station will be saved as the next
preset number.
40
5. All stations preset during "Scan", will overwrite
previously set stations.
6. To stop scan function, double tap the Phone Button.

21.5 Temporary Preset

With the temporary preset function, you may
temporarily preset stations automatically without
changing the existing preset stations. Tap the Phone
Button three times which will automatically scan for
10 temporary preset stations. The temporary preset
stations will be cleared when the system is powered
off.