Menu Structure - Crestron CAPTURE-HD Operation Manual

Crestron CAPTURE-HD/CAPTURE-HD-PRO
Capture Recorder Installer Mode Menu Structure
Operations Guide – DOC. 7233C
Recording

Media must be present in the default storage location in order for the
recording to start.

After pressing the REC button there is an approximately 10 second
"preparing to record" process that needs to complete before the recording
actually starts.

NEVER remove the media while a recording is in progress. (This action
could corrupt your file.)

The user can pause while recording. Press the PAUSE button to pause the
recording (yellow PAUSE button lights up). Press REC again to continue
recording.

Press the STOP button to end recording. Wait for a "Done" message to
appear before removing media.
Front Panel

"Front Panel Lock" menu allows the user to set a password to prevent
unauthorized access. A custom password can be assigned via front panel
controls.

A level gauge (bar graph at left side of the display) shows relative speech
level. The level can be adjusted via the CAPTURE-TPMC-4SM, the symbol,
or front panel controls. Adjust the level so that all but the top 1-2 bars are lit
while speaking. Samples are averaged so there is a slight delay in the gauge's
response to incoming speech audio.

Menu Structure

The front panel Installer mode menu structure of the Capture recorder is shown in the
following illustration.
High-Definition Capture Recorder: CAPTURE-HD/CAPTURE-HD-PRO  23
High-Definition Capture Recorder