Hitachi WJ200 Series Quick Reference Manual page 51

Standard Functions
NOTE:. Mark " " in b031=10 shows the accessible parameters when b031 is set "10", high
level access.
Func.
Name
Code
A001 Frequency source
A201
Frequency source,
nd
2 motor
A002
Run command source
A202
Run command source,
nd
2 motor
A003 Base frequency
A203
Base frequency,
nd
2 motor
A004
Maximum frequency
A204 Maximum frequency,
nd
2 motor
A005
[AT] selection
A011
[O] input active range start
frequency
A012 [O] input active range end
frequency
A013 [O] input active range start
voltage
A014
[O] input active range end
voltage
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
"A" Function
Description
Eight options; select codes:
00 ...POT on ext. operator
01 ...Control terminal
02 ...Function F001 setting
03 ...ModBus network input
04 ...Option
06 ...Pulse train input
07 ...via EzSQ
10 ...Calculate function output
Five options; select codes:
01 ...Control terminal
02 ...Run key on keypad,
operator
03 ...ModBus network input
04 ...Option
Settable from 30 Hz to the
maximum frequency(A004)
Settable from 30 Hz to the 2
maximum frequency(A204)
Settable from the base
frequency to 400 Hz
Settable from the 2
frequency to 400 Hz
Three options; select codes:
00...Select between [O] and [OI]
at [AT] (ON=OI, OFF=O)
02...Select between [O] and
external POT at [AT]
(ON=POT, OFF=O)
03...Select between [OI] and
external POT at [AT]
(ON=POT, OFF=OI)
The output frequency
corresponding to the analog
input range starting point,
range is 0.00 to 400.0
The output frequency
corresponding to the analog
input range ending point,
range is 0.0 to 400.0
The starting point (offset) for the
active analog input range,
range is 0. to 100.
The ending point (offset) for the
active analog input range,
range is 0. to 100.
50
Run
Mode
Lnitial data
Edit
or digital
nd
nd
base
Defaults
Units
−
02
−
02
−
02
−
02
60.0 Hz
60.0 Hz
60.0 Hz
60.0 Hz
−
00
0.00 Hz
0.00 Hz
0. %
100. %