Figure 49. Installing The Rails Onto The Floppy Drive Conversion Kit Carrier; Figure 50. Connecting The Flat Flex Cable To A Floppy Drive - Intel SR2400 User Manual

10. Reattach the slide rails onto floppy drive conversion kit carrier. See the figure below.

Figure 49. Installing the Rails onto the Floppy Drive Conversion Kit Carrier

11. Open the connector on the rear of the floppy drive by pulling up on the connector cover. See
letter "A" in the figure below.
12. Insert one end of the flat flex cable end into the floppy drive connector. See letter "B" in the
figure.
13. Push down on the connector cover to lock the cable into place. See letter "C" in the figure.
A

Figure 50. Connecting the Flat Flex Cable to a Floppy Drive

80
TP01309
B
C
TP01311