Intel SR2400 User Manual page 4

Your Server Chassis SR2400 shipped with the following items
A box of hardware components, referred to below as the "hardware box"
One 700W power supply, installed in the chassis
Low-profile PCI-X riser, installed in the chassis
CD-ROM / DVD drive tray, installed in the chassis
Four system fans, installed in the chassis
Chassis intrusion switch, installed in the chassis
Air baffle, installed in the chassis
Processor air duct, installed in the chassis
CD-ROM filler panel, in the hardware box
Floppy carrier assembly, in the hardware box
Six 32- 8mm screws, in the hardware box
Cables, in the hardware kit box
Rack handles, in the hardware box
Intel® Server Chassis SR2400 Quick Start User's Guide, in the chassis box
Attention document, in the chassis box
You must have one item from each of the following groups
Riser option, choose one:
 Full-height PCI-X riser
 Full-height performance PCI-X riser
 Full-height PCI-Express* riser
Hard drive installation option kit, choose one:
 SCSI hot-swap backplane kit
 SATA hot-swap backplane kit
 Fixed SATA drive kit
Control panel, choose one:
 Standard control panel
 Intel
®
Local Control Panel
2
The contents list includes only items included with the Intel Server Chassis SR2400. This list does not
include items that are shipped and pre-installed in the Intel Server Platform SR2400JR2.
3
Before purchasing any required options, refer to your server board documentation to determine which
option(s) are supported on your server board.
4 ®
The Intel Local Control Panel requires the installation of the optional Intel® Management Module –
Professional or Intel® Management Module – Advanced
iv
4
2
:
3
: