Set Current Time - ECOVACS Deebot D58 User Manual

Second time setting
Tips :
Selection scope: hour is between 0 and 23, minute is
between 0-59.
Under normal circumstance, time display on LCD shows
current time.
Current time setting
Tips :
Selection scope: hour is between 0 and 23, minute is
between 0-59.
Under normal circumstance, time display on LCD shows
current time.
Tips:
If you need to cancel first or second timing, please repeat set cleaning time, set the time as 00:00. Then the
label will disappear.
The time interval between two time setting should be more than 4 hours.
16
1. Now, the
number with time setting is flashing.
mode
2. Set hourandminute via
time press
minute. While decrease one hour and
minute for
mode
3. Press
current time setting.
For example:

Set current time

as 2:08 am,time
display on LCD
should be:
1. After second time setting, and then go to the
current time setting. The
and the number with time setting flashing.
mode
2. Set hour and minute via and
press
While decrease one hour and minute for
,and then press
mode
3. Then go to the frequency setting.
For example:
Set current time
as 12:07 pm,time
display on LCD
should be:
label high light, and the
and
will increase one hour or
.
again, and then go to
disappeared,
, each time
will increase one hour or minute.
to confirm.
, each