Cycle Cleaning; Set Cycle Cleaning; Cancel Cycle Cleaning - ECOVACS Deebot D54 User Manual

8.Cycle Cleaning

8.Cycle Cleaning

Set Cycle Cleaning

AUTO
Cancel the Cycle Cleaning
AUTO
AUTO
If you need the robot to work in the fixed time every day, please set the
procedure as belowing instruction:
Turn on the power button, then press the
work according to the AUTO mode till it show the low battery and go
back to charging.
● The time you press the
time next.
●
If you set the Cycle Cleaning,
●
After you set the cycle cleaning, please do not choose another mode,
and also not press
canceled. If want to pause the robot, press any button (except power
button). However, when you need to restart the robot, please still
press button. Press any button will cancel the cycle function.
●
After set the cycle function, if you need the robot return to charging,
please pause it at first, and move it to the charging block manually. Do
not press the
●
If you turn off the robot, although you have set the Cycle Cleaning, the
robot will not work when the setting time coming.
●
Please make sure the charging block have connected with the electrical
source, otherwise, robot will not work due to the run out of the
battery, even it is in the standby status.
If you need to cancel the cycle function:
Method One: Turn off the power and restart the robot
will be canceled.
:
Method Two During the working status, press any button
)
power button to pause the robot, and then press
button, the c ycle fu nction w ill b e c anceled.
button, then robot will start to work at that
indicator will light on.
button, otherwise, the cycle function will be
button, which will cancel the cycle function.
E n j o y S m a r t e r L i f e !
button, robot will
;
the cycle function
(
except
or AUTO or
14