Statistics Screen - Hughes ThurayaIP User Manual

to re-enter any configuration information supplied by your Service
Provider. You must enter the security code to complete the reset.
Current Settings: provides the current communications parameters.
Software Version
•
Interface Mode
•
Public Network IP Address
•
Private Satellite Modem IP Address
•
Modem International Mobile Equipment Identity (IMEI)
•
Satellite Modem Media Access Control (MAC) Addresses.
•
S S
TATISTICS CREEN
This screen provides you with an estimate of your data usage. Data
usage figures are obtained by counting the bytes in the IP packets
received by and sent from the
"since power on" (per session) and "Cumulative" (lifetime) data usage
counts. To reset the data counters of a session, simply select the reset
button for either transmit or receive and click the Apply button.
Note:
estimates only. This feature is not tied into the actual billing
system. Hughes assumes no liability if differences are found
between data usage figures and your actual bill.
16
The data usage figures provided on the screen are
ThurayaIP terminal. You can view both

Statistics Screen

ThurayaIP Satellite Modem User Guide