Heating Sensor (Pt100) - Electrolux T5130 Service Manual

Sensors and overheating thermostats
16

5.1.2 Heating sensor (PT100)

Description
The heating sensor is placed at the back of the machine.
The heating sensor measures the temperature in the inlet air and the signal is returned to the CPU.
The CPU turns the heating unit off when the inlet air thermistor indicates that the required
temperature has been reached.
Replacement of heating sensor (PT100)
Disconnect the power to the machine.
Disconnect the heating sensor and remove it. Connect the new heating sensor and put it in position.
Make sure the sensor gets all the way down.
T5130 T5130C
fig.7588
⑧