Electrolux T5130 Service Manual page 41

Unscrew the rest of the screws on the panel.
Disconnect the RMC and cut the cable ties. If there is a "FREE" connection, disconnect it.
At the front of the machine: Open the door and remove the two plugs. Loosen the screws counter
clockwise until they stop to release the support rollers.
Remove the complete drum package with the rear panel by lifting in the drum belt.
Carefully put the drum package on the floor witht the rear panel facing upwards.
46
Carefully tilt the machine backwards and remove the three screws under the machine to release the
lower element cover panel.
Disconnect the wires, demount the cover panels and remove the heating element.
47
Heating unit, electric
41
fig.7531
fig.7550