Electrolux T5130 Service Manual page 90

90
Unscrew the four screws at the panel around the heating element.
Demount the cover panel to the electrical connections and disconnect all wires.
94
Unscrew the rest of the screws on the panel.
Disconnect the RMC and cut the cable ties. If there is a "FREE" connection, disconnect it.
At the front of the machine: Open the door and remove the two plugs. Loosen the screws counter
clockwise until they stop to release the support rollers.
Remove the complete drum package with the rear panel by lifting in the drum belt.
Carefully put the drum package on the floor witht the rear panel facing upwards.
95
Maintenance
fig.7527
fig.7531