Electrolux T5130 Service Manual page 46

46
Unscrew the rest of the screws on the panel.
Disconnect the RMC and cut the cable ties. If there is a "FREE" connection, disconnect it.
At the front of the machine: Open the door and remove the two plugs. Loosen the screws counter
clockwise until they stop to release the support rollers.
Remove the complete drum package with the rear panel by lifting in the drum belt.
Carefully put the drum package on the floor witht the rear panel facing upwards.
53
Remove the bolt and washer from the bearing to release the drum. Remove the rear panel from the
old drum. Mount the rear panel with with the bearing on the new drum.
54
Drum
fig.7531
fig.7532