Heating Sensor (Ntc-Sensor) - Electrolux T5130 Service Manual

Sensors and overheating thermostats
20

5.2.2 Heating sensor (NTC-sensor)

Description T5130C
The heating sensor is placed next to the outlet overheating thermostat behind the door switch.
The heating sensor measures the temperature in the outlet air and the signal is returned to the PCB.
The PCB turns the heating unit off when the outlet air thermistor indicates that the required
temperature has been reached.
Replacement of heating sensor (NTC-sensor) T5130C
Disconnect the power to the machine.
Open the door and demount the door switch. Disconnect the heating sensor and remove it.
Connect the new heating sensor.
fig.7597
⑬
Remount the door switch.