20
4.5 Heating unit
4.5.1
Steam
The steam unit is to be mounted on the filter unit as described below.
• Insert two screws in the steam unit's two upper fixing holes.
• Lift the unit into position and hang it using the keyhole like holes in the filter unit.
• Screw the steam unit tight against the filter unit from the inner side of the filter housing.
• Install the steam unit's two protective plates.
Note!
The filter unit's outer rear plate must be loosened on the left-hand side. First install protective plate A and
thereafter plate B.
Installation manual
fig.6782
fig.6784
fig.6783