Main Dryer - Electrolux T5130 Service Manual

MAIN DRYER

12:1 O.H. THERMOSTAT - INLET AIR
The error code is activated if the protection thermostat for inlet air has trigged due to overheating.
The overheating thermostat for inlet air will be trigged at 195 °C.
The overheating thermostat for inlet air needs to be mechanically restored.
When the overheating thermostat for inlet air is restored it is possible to reset the error code from the
timer by a short press on the control knob/start button and the ongoing program will continue. A long
press on the control knob/start button will make the timer reset and ongoing program will be ended.
The error code can be trigged if:
• The inlet air sensor has stopped operating correctly.
• The fan has stopped operating.
• The airflow is obstructed, by lint, overload, etc.
If the overheating thermostat for inlet air is not trigged, but there still is an error code:
• Check the harness, connectors and functions by reading the electrical schematic and by using
the SHOW INPUTS menu when the machine is in service mode.
12:2 O.H. THERMOSTAT - OUTLET AIR
The error code is activated if the protection thermostat for outlet air has trigged due to overheating.
The overheating thermostat for outlet air will be trigged at 90°C.
The overheating thermostat for outlet air needs to be mechanically restored.
When the overheating thermostat for outlet air is restored it is possible to reset the error code from
the timer by a short press on the control knob/start button and the ongoing program will continue.
A long press on the control knob/start button will make the timer reset and ongoing program will
be ended.
The error code can be trigged if:
• The outlet air sensor has stopped operating correctly.
If the overheating thermostat for outlet air is not trigged, but there is still an error code:
• Check the harness, connectors and functions by reading the electrical schematic and by using
the SHOW INPUTS menu when the machine is in service mode.
Troubleshooting
75