Electrolux T5130 Service Manual page 24

Door
24
Demount the door handle and remount the screws. Mount the door handle on the opposite side
using the existing scews.
Remove the upper and lower pivot and mount them at the opposite side.
fig.W00183A
⑲
Demount the locking panels by loosening the barb with a screwdriver.
Press out the locking panels, swap them over and press into position.
fig.W00184A
⑳
Mount the door on the other side. Push the door and the top pivot into the upper hinge and then
adjust the lower pivot into the lower hinge. Mount the remaining screw when the lower pivot is in
correct position. Tighten the screws.
Connect the power to the machine.
Test run the machine.