Soft-Off By Pwr-Bttn; Pwr-On By Modem/Lan; Resume By Alarm; Irq 8 Break Suspend - TMC LI6BM User Manual

Chapter 6 BIOS and System Setup

Soft-Off by PWR-BTTN

This field defines the power-off mode when using an ATX power supply.
The Instant-Off mode allows powering off immediately upon pressing
the power button. In the Delay 4 Sec mode, the system powers off when
the power button is pressed for more than four seconds or places the
system in a very low-power-usage state, with only enough circuitry
receiving power to detect power button activity when pressed for less
than 4 seconds. The default value is Instant-Off.

PWR-ON by Modem/LAN

An input signal on the serial Ring Indicator (RI) line (in other words, an
incoming call on the modem or incoming signal from LAN) awakens the
system from a soft off state.

Resume by Alarm

This allows a computer to be turned on automatically through the timer
set in the BIOS to make the system more scheduleable. By default, this
field is set to Disabled.

IRQ 8 Break Suspend

You can enable or disable the monitoring of IRQ 8 (Real Time Clock) so
it does not awaken the system from Suspend mode.

Reload Global Timer Events

This section determines the reloading of the 'timers' after entering the
Full On You can enable or disable the monitoring of IRQ 8 (Real Time
Clock) so it does not awaken the system from Suspend mode.
LI6BM User's Manual 49