Drive A / Drive B; Video; Halt On - TMC LI6BM User Manual

Chapter 6 BIOS and System Setup
NOTE: The specifications of your drive must match with the drive
table. The hard disk will not work properly if you enter
incorrect information in these fields. If your hard disk drive
type is not matched or listed, you can use Type User to define
your own drive type manually.

Drive A / Drive B

These fields identify the types of floppy disk drive A or drive B that has
been installed in the computer. The available specifications are:
1.2MB
360KB
5.25 in. 5.25 in.

Video

This field selects the type of video display card installed in your system.
You can choose the following video display cards:
EGA/VGA For EGA, VGA, SEGA, SVGA
or PGA monitor adapters. (default)
CGA 40 Power up in 40 column mode.
CGA 80 Power up in 80 column mode.
MONO For Hercules or MDA adapters.

Halt On

This field determines whether or not the system will halt if an error is
detected during power up.
No errors The system boot will not be halted for any error
that may be detected.
All errors Whenever the BIOS detects a non-fatal error,
the system will stop and you will be prompted.
All, But Keyboard The system boot will not be halted for a
keyboard error; it will stop for all other errors
All, But Diskette The system boot will not be halted for a disk
error; it will stop for all other errors.
All, But Disk/Key The system boot will not be halted for a key-
board or disk error; it will stop for all others.
38
1.44MB 2.88MB
720KB
3.5 in. 3.5 in. 3.5 in.
LI6BM User's Manual