I/O Connectors; J1: S-Vhs Connector; J2: Rca Connector - TMC LI6BM User Manual

5.1 I/O Connectors

The I/O connectors connect the LI6BM to the most common peripherals.
To attach cables to these connectors, carefully align Pin 1 of the cables to
that of the connectors. Refer to Figure 4 for the location and orientation
of the connectors.
Figure 4: Orientation of the I/O Connector

5.2 J1: S-VHS Connector

The J1 S-VHS connector is for the TV-Out feature of the onboard ATi 3D
RAGE LT PRO VGA controller. Below are the pin-out assignments of the
connectors.

5.3 J2: RCA Connector

The J2 RCA connector is for the TV-Out feature of the onboard ATi 3D
RAGE LT PRO VGA controller.
LI6BM User's Manual
Chapter 5 Installation
Pin # Signal Name
1 Ground
2 Ground
3 Luminance Signal
4 Composite Signal
21