PVCA HORIZONTAL COLINEAR DIRECT VENT ADAPTOR
Colinear adaptor to be used in conjunction with single flue horizontal vent kit PVVK-SH. The two attachments are used for colinear
direct vent installation.
1.
Attach colinear adaptor to back of heater with two (2)
screws.
8-8 x 1/2" Phillips Truss Head Screw
Page 28
Figure 36 - Colinear adaptor
COLINEAR ADAPTER
Figure 37
2. When adapter is connected, continue with your vent run.
Cementing PVC joint is recommended, but not required on
colinear fresh air intake adaptor.
SINGLE FLUE HORIZONTAL
MODEL PVVK-SH
Figure 38
3 11/16"
4 13/16"
6 1/8"
Figure 39
25700-1-0809
7 5/16"