Table of Contents
Advertisement
Troubleshooting
My cordless handset is not performing normally.
•
Make sure the power cord is securely plugged into the telephone base. Plug the unit into a different working electrical outlet.
•
Move the cordless handset closer to the telephone base. It may be out of range.
•
Reset the telephone base by unplugging the unit's electrical power. Wait for 15 seconds and plug it back in again. Allow up to one minute for the cordless handset and the
telephone base to synchronize.
•
Other electronic products can cause interference to your cordless telephone. Try installing your telephone as far away from these electronic devices as possible: wireless
routers, radios, radio towers, pager towers, cellular telephones, intercoms, room monitors, televisions, personal computers, kitchen appliances and other cordless
telephones.
Common remedy for electronic equipment.
•
If the unit is not responding normally, trying putting the cordless handset in the telephone base or the charger. If it does not seem to respond, try the following (in the
order listed):
•
Disconnect the power to the telephone base.
•
Disconnect the battery on the cordless handset and the spare battery in the telephone base.
•
Wait a few minutes before connecting power to the telephone base.
•
Re-install the battery and place the cordless handset into the telephone base or charger.
•
Wait for the cordless handset to synchronize its connection with the telephone base. Allow up to one minute for this to take place.
39
Hide quick links:
Advertisement
Table of Contents
