Using the phone
NOTE: If the destination handset does not pick up the intercom call, the originating handset can return to the external call by pressing
If a call remains on hold for about 100 seconds, the screen of the originating handset shows
call automatically. The destination handset returns to idle mode.
Switch between external and internal calls
When on an external call and you wish to intercom another system handset in your home without ending the external call:
1. Press
The screen will display
2. Press the handset number you wish to reach. The screen will display
3. Press
on the originating handset to switch between the external call (outside) and intercom call.
Answer an incoming call during an intercom call
1. During an intercom call, there will be an alert tone signalling an incoming call.
2. To answer the incoming call, press
3. To terminate the intercom call without answering the incoming call, press
Page handset
This feature allows the telephone base to page all the handsets.
1. Press
on telephone base, all the handset(s) will ring and the screens display
2. To stop paging, press
again on the telephone base,
TRANSFER TO:
or
on the handset, and the intercom call will end automatically.
,or any keys (0-9, #, *) on the handset.
UNABLE TO CALL TRY AGAIN
CALLING HANDSET X.
on the handset.
PAGING
.
, or
.
and reconnects to the external
21