Delete Your Announcement; Message Playback; New Message Indication; Delete All Messages - Telstra V580 User Manual

Using the answering machine (Telstra V580a only)

Delete your announcement

1. While in idle mode, press and the system will announce "Announcement, press PLAY or press RECORD."
2. Press to delete, and the system will announce "Announcement deleted."
NOTE: Your announcement can be up to 90 seconds in length. When your announcement is deleted, calls will be answered with the pre-programmed announcement.
If you receive calls when the memory is full, the telephone will ring 15 times, then answer and announce "Please enter remote access code."

Message playback

1. Press to listen to messages. Press
If you have new messages waiting, you will hear only the new message (oldest first). If there are no new messages, the system will play back all messages (oldest first).
When playback begins, the total number of messages and the day and time it was received will be announced.

New message indication

The message display counter will flash when there are new answering system messages. If the new message alert tone is turned on, the telephone base will beep every ten
seconds when there are un-reviewed messages.
Options during playback
1. Press or to adjust the speaker volume.
2. Press to skip to the next message.
3. Press to repeat the message currently playing. Press twice to listen to the previous message.
4. Press to delete the current message. The system will advance to the next message.

Delete all messages

1. When in idle mode, press and hold
NOTE: If the system has less than five minutes of recording time left, the remaining time will be announced. If
You willhave to delete some messages before new ones can be received. Only old messages can be deleted. Messages can only be deleted after they are played.
to stop playback.
to delete all old messages. The system will announce "All old messages deleted."
F
is flashing in the message window, memory is full.
31