Set Message Alert Tone; Outgoing Announcement; Record Your Announcement; Play Your Announcement - Telstra V580 User Manual

Using the answering machine (Telstra V580a only)

Set message alert tone

This feature programs the system to beep every 10 seconds to alert you of new messages. The beeping will stop when all new messages have been reviewed. To set the
message alert tone:
1. Press in idle mode until the system announces the message alert tone setting.
2. Press or to toggle between on or off, then press
NOTE: The answering system must be turned on for the message alert tone to function.

Outgoing announcement

The outgoing announcement is the message callers hear when calls are answered by the answering system.
The telephone is preset with a greeting that answers calls with " Hello, please leave a message after the tone. " You can use this factory announcement, or replace it with your
own outgoing announcement. While in the ANNC menu, press

Record your announcement

1. While in idle mode, press and the system will announce "Announcement, press PLAY or press RECORD."
2. Press to record, and the system announces "Record after the tone, press STOP when you are done."
3. After the tone, speak towards the microphone at the bottom front of the telephone base from about nine inches away.
4. Press when finished.
5. The answering system will automatically playback the newly recorded announcement. Press

Play your announcement

1. While in idle mode, press
2. Press to play, press
30
and the system will announce "Announcement, press PLAY or press RECORD."
again to stop the playback.
to save the setting and go to the next setting or press
again anytime to exit.
to stop the playback anytime.
to save and return to idle mode.