Base Station Overview; 3.3 Display Icons And Symbols - Binatone iDECT C3i system User Manual

3.2

Base Station Overview

1. PAGE
Press the Page button on the base station to
page your handset(s).
It will ring for approximately 60 seconds.
Press and hold to put base into registration mode.
2. CHARGING CRADLE

3.3 Display Icons and Symbols

The LCD display gives you information on the current status of the telephone.
Scroll up / down the menu items / Phonebook list / Redial list / Call List
Steady when the handset is in range of the base. Flashes when out of
range of the base or not registered to the base.
Steady when an intercom call is in progress.
Flashes when there is an incoming internal call.
Indicates a call is in progress on that handset.
Indicates that Speakerphone is being used.
Indicates when the telephone answering machine (TAM ) is turned on.
Flashes when new TAM messages are received or the TAM memory is
full.
Indicates that the handset ringer is switched off.
Steady when an alarm is set. Flashes when the alarm is sounding.
Indicates that the keypad is locked.
Indicates when you have a new Voice Mail message.
(This is a Caller Display service and is not usually available from
UK network providers.)
Indicates when the battery is fully charged.
Whole icon flashes when the battery is charging.
Internal block icon flashes when the battery is in final charging stage.
Indicates when the battery needs charging.
Flashes when low battery power level is detected.
1
2
7