De-Register A Handset; Ase Settings; Change The Dial Mode; Change The Flash (Recall) Time - Binatone Concept Combo 3525 Twin User Manual

7.4 Base Settings
7.4.1

De-register a Handset

This operation should only be necessary if one of your handsets becomes
faulty or lost and needs to be replaced.
You will need to enter the 4-digit System PIN (Default PIN is 0000) in order
to de-register a handset from the base station. A de-registered handset will
have the antenna icon flashing and "REGISTER" on the display.
Note: You cannot de-register the handset that you are currently using.
1. Press <MENU/OK> and <UP/DOWN> to select
2. Press <MENU/OK> to show DELETE HS.
3. Press <MENU/OK> and the display shows "PIN? ------".
4. Enter the 4-digit system PIN (default 0000).
5. Press <MENU/OK> and the first handset number is displayed.
6. Press <UP/DOWN> to scroll through the list of registered handsets and
select the number of the handset you want to de-register.
7. Press <MENU/OK> to confirm, and the chosen handset will be
de-registered.
7.4.2

Change the dial mode

You should normally leave the dialling mode at its default setting of TONE
(also called DTMF) unless the phone is connected to an old exchange that
only recognises PULSE dialling.
Note: If PULSE dialling is set, you can press the * key to switch to TONE
dialling for the rest of that call.
1. Press <MENU/OK> and <UP/DOWN> to select BS SETTINGS.
2. Press <MENU/OK> and <UP/DOWN> to select DIAL MODE.
3. Press <MENU/OK> and <UP/DOWN> to select TONE or PULSE
(The current setting is indicated by an asterisk to the right).
4. Press <MENU/OK> to confirm.
7.4.3

Change the Flash (Recall) Time

You may need to change the recall (flash) time if your phone is connected to
a PBX. The recall time options are SHORT (the default value of 100ms),
MEDIUM (300ms) or LONG (600ms).
1. Press <MENU/OK> and <UP/DOWN> to select BS SETTINGS.
2. Press <MENU/OK> and <UP/DOWN> to select FLASH TIME.
3. Press <MENU/OK> and <UP/DOWN> to select your desired flash time
(SHORT, MEDIUM,
asterisk to the right).
4. Press <MENU/OK> to confirm.
LONG, with the current setting indicated by an
41
BS SETTINGS.