View Frame - HP 377707-002 User Manual

Table 1-5: InfiniBand Icon Branches (Continued)
Branch
Device Management
(select hardware platforms
only)
Table 1-6 lists and describes the configurable branches under the Ethernet icon.
Table 1-6: Ethernet Icon Branches
Branch Description
Bridge Groups Click this branch to view bridge groups on your switch.
Trunk Groups Click this branch to view trunk groups on your switch.
Table 1-7 lists and describes the configurable branches under the InfiniBand icon.
Table 1-7: InfiniBand Icon Branches
Branch
Global Policies
SRP Hosts
Targets
Logical Units
ITs
ITLs
Global Statistics
Table 1-8 lists and describes the configurable branches under the Help icon.
Table 1-8: Help Icon Branches
Branch Description
Help Index Click this branch to launch CM on-line help.
Support Click this branch to open the HP support Web site.

View Frame

The View frame appears on the right-hand side of the interface. Input fields and device details appear in
this frame. The contents of the View frame vary based on the branch that you click in the Tree frame.
Description
Expand the Device Management icon to display the following branches:
• IOU—click this branch to view the I/O unit on your switch.
• IOCs—click this branch to view the controller(s) on your device.
• IOC Services—click this branch to view the IB features on your
device.
Description
Click this branch to view and configure the default attributes of new IB-to-
FC connections.
Click this branch to view and configure SRP hosts that serve as initiators
for SAN fabrics.
Click this branch to view and configure FC targets that connect to your
switch through FC gateways.
Click this branch to view and configure FC Logical Units (LUNs) that
connect to your switch through FC gateways.
Click this branch to view and configure attributes of initiator-target
connections.
Click this branch to view and configure attributes of initiator-target-LUN
connections.
Click this branch to view IB-to-FC traffic statistics.
5