2: Getting Started; Prepare Your Device - HP 377707-002 User Manual

Getting Started
Preparing Your Device
The following sections appear in this chapter:
• "Preparing Your Device" on page 9
• "Launching Chassis Manager" on page 11
• "Navigating Chassis Manager" on page 14
• "Understanding Access Privileges" on page 15
• "Viewing Device Status" on page 15
To launch CM on your Server Switch, you must:
• Configure an IP address on the Ethernet management port.
• Configure an IP gateway on the Ethernet management port.
• Enable HTTP and/or HTTPS services.
NOTE: CM optionally supports Secure Sockets Layer (SSL) secure connections.
If your device meets these requirements, proceed to
Otherwise, to prepare your device:
"Launching Chassis Manager" on page
9
2
11.