HP 377707-002 User Manual page 82

74
Viewing Fibre Channel Target Properties
To view the properties of a Fibre Channel target:
1. Expand the Fibre Channel icon in the Tree frame.
2. Click the Targets branch. A Targets table that includes all targets in your configuration file
appears in the View frame.
3. Click the radio button next to the target whose properties you want to view, then click the
Properties button. The SRP Target Properties window opens.
elements of this window.
Table 7-5: SRP Target Properties Window Elements
Element
WWPN field
WWNN field
FC Address field
IOC GUID field
Physical Access
field
MTU field
Connection Type
field
Description field
Service Name field
Apply button
Reset button
Close button
Help button
Configuring Fibre Channel Target Properties
To configure the properties of a FB target:
1. Expand the Fibre Channel icon in the Tree frame.
2. Click the Targets branch. A Targets table that includes all targets in your configuration file
appears in the View frame.
3. Click the radio button next to the target whose properties you want to view, then click the
Properties button. The SRP Target Properties window opens.
4. (Optional) Click the down radio button or nlPort radio button to configure the connection type of
the target.
5. (Optional) Enter a description in the Description field.
Description
WWPN of the port on the target through which your Server Switch
accesses the target.
WWNN of the target.
FC address of the target.
InfiniBand I/O controller (IOC) through which initiators access the
target.
Port on your Server Switch (in slot#/card# format) through which your
Server Switch accesses the target.
Maximum transmission unit, in bytes, of the target.
Provides the down and nlPort radio buttons so you can assign a
connection type to the target.
User-assigned target description.
NOTE: If no user has assigned a description, a default description
appears.
Name of the service to associate with the WWPN.
Applies the changes that you make in the window.
Resets the fields in the window to match the properties of the target.
Closes the window. If you close the window before you apply changes,
CM makes no changes to the target.
Opens on-line help.
Table 7-5 lists and describes the