HP 377707-002 User Manual page 33

Table 3-7: Fibre Channel Port Properties Window Elements (Continued)
Element
Oper Status field
Auto Negotiation Supported field
Auto Negotiation field
Set Port Speed field
Current Speed field
Current Connection Type field
MTU field
WWNN field
WWPN field
FC ID field
Last Changed On field
Apply button
Reset button
Close button
Help button
Table 3-8 lists and describes the elements in the Port Properties window of an IB port.
Table 3-8: InfiniBand Port Properties Window Elements
Element
Port field
Name field
Type field
Admin Status field
Oper Status field
Auto Negotiation Supported field
Auto Negotiation field
Set Port Speed field
Current Speed field
Physical State field
Description
Displays up to indicate that the port is physically ready for
use, otherwise displays down.
Displays true if the port supports auto-negotiation
Provides the Enable checkbox so you can enable or disable
auto-negotiation on the port.
Provides the 1G and 2G radio buttons so you can configure
the port speed.
Displays the speed of the port.
Indicates the type of connection that the Server Switch
dynamically discovered for this port.
Displays the MTU of the port, in bytes.
Displays the worldwide node name (WWNN) of your
device.
Displays the worldwide port name (WWPN) of the port.
FC Protocol (FCP) identifier of the port.
Displays the time and date of the last time that a user
configured the port.
Applies the changes that you make in the Port Properties
window to the port.
Resets the fields in the window to match the properties of
the card.
Closes the window. If you close the window before you
apply changes, CM makes no changes to the port.
Opens on-line help.
Description
Displays the port number in slot#/port# notation.
Provides a port name that you can edit and apply to the port.
Displays the type of the port.
Provides the up and down radio buttons so you can
configure the administrative status of the port.
Displays up to indicate that the port is physically ready for
use, otherwise displays down.
Displays true if the port supports auto-negotiation
Provide the Enable checkbox so you can enable or disable
auto-negotiation on the port.
Provides the 2500M, 10G and 30G radio buttons so you
can configure the port speed.
Displays the speed of the port.
Displays the physical state of the port.
25