Clock Functions - Electrolux EOB6850 User Manual

12 www.electrolux.com
onds. You will see the heat-up indicator
alternates.
5.11 Residual heat
When you deactivate the appliance, the
display shows the residual heat. You can
use the heat to keep the food warm.
5.12 Energy saving
The appliance contains fea-
tures which help you save en-
ergy during everyday cooking:
• Residual heat:
– When the heating function or pro-
gramme operates, the heating ele-
ments are deactivated 10 % earlier
(the lamp and fan continue to oper-

6. CLOCK FUNCTIONS

6.1 Clock functions
Symbol
If you set the time for a clock function, the
time starts to count down after 5 sec-
onds.
If you use the clock functions Du-
ration
the appliance deactivates the
heating elements after 90 % of the
set time. The appliance uses the
residual heat to continue the
cooking procedure until the time
ends (3 - 20 minutes).
Setting the clock functions
1. Set a heating function.
Function
To set a countdown (max 2 h 30 min). This function
has no effect on the operation of the appliance. You
Minute Minder can also activate it when the appliance is off. Use
to activate the function. Press
minutes and OK to start.
To set how long the appliance has to be in opera-
Duration
tion (max. 23 h 59 min).
To set the switch-off time for a heating function
End Time
(max. 23 h 59 min).
and End Time
ate). For this feature to operate, the
cooking time must be longer than 30
minutes or you must use the clock
functions ( Duration , End Time ).
– When the appliance is off, you can
use the heat to keep food warm. The
display shows the remaining temper-
ature.
• Deactivating the display - If necessa-
ry, you can fully deactivate the appli-
ance. Touch
time until the display goes out. This
step also activates the appliance.
• Cooking with the lamp off - Touch
and hold
vate the lamp during cooking.
• Eco functions - refer to " Heating
Functions ".
Description
2.
Press
display shows the necessary clock
function and the related symbol.
3.
Press
time. Press OK to confirm.
,
When the time ends, an acoustic sig-
nal sounds. The appliance deacti-
vates. The display shows a message.
4. Press a sensor field to stop the signal.
and at the same
for 3 seconds to deacti-
or to set the
again and again until the
or to set the necessary