Server Blade Setup
3. Slide the blade sleeve fully into the bay until it clicks into place.
Figure 3-3: Installing a blade sleeve
Installing a ProLiant BL30p Server Blade
CAUTION: Be sure that the ProLiant BL30p server blade is installed in a server
blade enclosure with enhanced backplane components. Installing a ProLiant BL30p
server blade in a server blade enclosure without enhanced backplane components
can damage the power subsystem.
CAUTION: Always populate the server blade enclosure bays and blade sleeves with
either a server blade or server blade blank. Unpopulated bays and blade sleeves can
lead to improper cooling and thermal damage.
1. Install the server blade into the blade sleeve (1). Slide the server blade fully into
the blade sleeve. Refer to "Removing a Server Blade Blank" to remove a blank
from the blade sleeve, if necessary.
3-4
HP ProLiant BL30p Server Blade Setup and Installation Guide