7. Change positions 1, 5, and 6 of SW1 to off.
8. Repeat steps 4 and 5.
If both the current and backup versions of the ROM are corrupt, you must return the
system board for a service replacement. Refer to the HP ProLiant BL p-Class System
Maintenance and Service Guide and contact an authorized reseller.
Problems After Initial Boot
Once the server blade has passed POST, you may still encounter errors, such as an
inability to load the operating system. Reinstall the operating system and use the
documentation that ships on the HP ProLiant Essentials Rapid Deployment Pack CD
or refer to the HP ProLiant Servers Troubleshooting Guide for more information.
Refer to the HP ProLiant Servers Troubleshooting Guide for the following:
•
Information you need to collect when diagnosing software problems and to
provide when contacting support
•
Instructions on how to upgrade the operating system and its drivers
•
Information about available recovery options and advice on minimizing
downtime
HP ProLiant BL30p Server Blade Setup and Installation Guide
Server Blade Troubleshooting
A-19