Problems After Initial Boot - HP DL740 - ProLiant - 4 GB RAM User Manual

Troubleshooting Information
Table E-6: Memory Configuration Guidelines
Problem
Memory alarm on solid
DIMM status LEDs blinking

Problems After Initial Boot

After your server has passed the POST, you may still encounter errors, such as an
inability to load your operating system. Use Table E-8 to troubleshoot server
installation problems that occur after the initial boot.
Refer to the HP Servers Troubleshooting Guide for more information.
For updated information about supported operating systems, log on to the Internet:
www.hp.com/products/servers/platforms/
E-12
Possible Cause
Missing memory cartridge
Unlocked memory cartridge
Improper memory
configuration
Possible Solution
Install all five memory
cartridges. Follow memory
configuration guidelines for
proper insertion of DIMMs, as
explained on the system hood
label.
Lock memory cartridge PIRNs
by turning clockwise.
Blinking DIMM status LEDs
indicate which memory banks
have a configuration problem.
Follow memory configuration
guidelines for proper insertion
of DIMMs, as explained on the
system hood label.
HP ProLiant DL740 Server User Guide